To pair your new or recently reset Melomania 1 earphones to your Android, follow these instructions:
Step 1. Remove your Melomania 1 earphones from the charging case.
Take your Melomania 1 out of the charging case, they will turn on automatically and enter pairing mode. This is signalled by LED flashing white and blue on one bud (primary) and flashing white on the other (secondary).
Step 2. Open your mobile device’s Settings -> Bluetooth -> enable Bluetooth.
Step 3. Select Melomania L or R // Cambridge.
Step 4. Accept pairing request.
Step 5. Melomania L or R // Cambridge will now show as “Connected” in your Bluetooth devices list.
Step 6. The Melomania 1 that was not selected in Step 3. will send a pairing request, accept this.
- On TWS+ phones the second Melomania 1 will automatically connect.
Step 7. Your Melomania 1 is now connected.
Both Melomania 1 will now be seen in the Bluetooth devices list. One will show as “Connected” and the other will show as “Not Connected”. This is normal.
- On some TWS+ phones, one Melomania 1 will show as “Active”. This is normal.