iOS
v2.1.0 (27/06/2022)
- Removed Facebook as sign-in method.
- Added Push Notifications.
v2.0.0 (13/04/2022)
- Changing codec, or voice prompt language, requires both earbuds to be connected.
- Updates to Chinese language text.
- Improved text editing.
-
The sound of a Custom EQ no longer changes when leaving the EQ pages.
-
The sound of a Custom EQ no longer changes briefly when ‘Save’ is pressed.
- App and Firmware versions are now always displayed on More and Settings pages.
- Baseline for Custom EQ is now the Immersive Preset.
- Mavenoid support engine integrated.
- Added a note that firmware update takes up to 15 minutes.
- ‘Done’ button now always shows when the localised iOS keyboard appears.
- After resetting a Custom EQ the selection now remains on that profile.
v1.8.0 (10/08/2021)
-
Corrected operation of the EQ parameter sliders
-
Resolved a problem with returning to the EQ page, after changing the EQ parameters, causing app to crash
v1.7.8 (03/08/2021)
- Improved progress animation during the firmware update and Audio Mode change
- Added live notes field to the firmware update progress screen
- Updating firmware, or changing Audio Mode is now prevented if the earbud battery level is below 10%
- Updated EQ pre-set table to support new Neutral EQ
- Added user registration and the ability to receive an extra 6 months free warranty
- Added device registration
- Updated tutorials
- Improved compatibility with specific mobile devices
v1.3.0 (12/03/2021)
- Added functional support for Melomania 1+.
- Added Melomania 1+ tutorials and user guide.
- Location services permissions optimised to support devices without GPS.
- Operation when only one earphone is connected optimised.
v1.2.0 (12/02/2021)
- Melomania Touch pairing tutorial pages added to No Device Found page.
- Melomania Touch pairing tutorial pages added to User Guide.
- Updates to graphics and text.
v1.1.3 (23/01/2021)
- Text changed to reflect pairing mode activation time being increased from 3s to 8s.
v1.1.2 (05/01/2021)
- UI changed to return directly to the Hub screen after firmware update.
- Added a pop-up message to reconnect Bluetooth when the Refresh Connection page is displayed.
- Added a new Welcome page for when earphones are not connected.
- The pop-up message advising that a firmware update is available is now shown after the earphone battery level animation is completed.
- Added a time-out between feedback submissions.
- Corrections in Simplified Chinese text.
- Deleted ‘Left’ and ‘Right’ text from Hub page when phone language is French.
v1.1.1 (01/01/2021)
- Corrections in Simplified and Traditional Chinese text.
- Removed the three dots animation on Searching page.
- Location services optimised.
- Added auto-complete for ‘Melomania model’ field in Feedback form.
v1.1.0 (21/12/2020)
- Multi-language support added.
- Changed the text on the button displayed after completion of switching audio mode and firmware update, from ‘OK’ to ‘Refresh Connection’.
- Replaced the word ‘Return” with a ‘current location’ symbol on the Find My Earphones page.
v1.0.0 (08/12/2020)
- Melomania initial release.
Android
v2.8.6 (556) (02/11/2022)
- Fixed issue where Find My Earphones button was unresponsive whilst earphones are connected
v2.8.5 (553) (12/09/2022)
- Fixed issue where Add Current Device button was unresponsive.
v2.8.4 (551) (04/08/2022)
- Removed Facebook as sign-in method.
- Added Push Notifications.
v2.8.2 (546) (13/04/2022)
-
‘My Account’ only available when connected to the Internet.
-
Changing codec, or voice prompt language, requires both earbuds to be connected.
-
Underscores in registered email addresses now supported.
-
Baseline for Custom EQ is now the Immersive Preset.
-
The sound of a Custom EQ is no longer affected by selecting ‘Save’.
-
Mavanoid support integrated.
-
Added a note that firmware update takes up to 15 minutes.
-
After resetting a Custom EQ the selection now remains on that profile.
v2.3.4 (521) (24/08/2021)
-
The reference EQ is now set to ‘Immersive’ after resetting a Custom EQ Preset
-
Corrected an issue where the pop-up notification advising of the availability of firmware update was not displayed
-
Corrected the interface to the Customer Service site
-
Corrected an issue that caused the Melomania app to become the default browser on some phones.
- Improved progress animation during the firmware update and Audio Mode change
- Added live notes field to the firmware update progress screen
- Updating firmware, or changing Audio Mode is now prevented if the earbud battery level is below 10%
- Updated EQ pre-set table to support new Neutral EQ
- Added user registration and the ability to receive an extra 6 months free warranty
- Added device registration
- Updated tutorials
- Improved compatibility with specific mobile devices
v1.3.0 (502) (08/03/2021)
- Added functional support for Melomania 1+.
- Added Melomania 1+ tutorials and user guide.
- Location services permissions optimised to support devices without GPS.
- Operation when only one earphone is connected optimised.
v1.2.0 (500) (12/02/2021)
- Melomania Touch pairing tutorial pages added to No Device Found page.
- Melomania Touch pairing tutorial pages added to User Guide.
- Updates to graphics and text.
- Text changed to reflect pairing mode activation time being increased from 3s to 8s.
v1.1.1 (108) (22/01/2021)
- UI changed to return directly to the Hub screen after firmware update.
- Added a pop-up message to reconnect Bluetooth when the Refresh Connection page is displayed.
- Added a new Welcome page for when earphones are not connected.
- The pop-up message advising that a firmware update is available is now shown after the earphone battery level animation is completed.
- Corrections in Simplified Chinese text.
- Deleted ‘Left’ and ‘Right’ text from Hub page when phone language is French.
v1.1.0 (107) (06/01/2021)
- Optimised Find My Earphones map formatting for China region.
- Removed the three dots animation on Searching page.
- Location services optimised.
- Added auto-complete for ‘Melomania model’ field in Feedback form.
- Added a time-out between feedback submissions.
- Changed the text on the button displayed after completion of switching audio mode and firmware update, from ‘OK’ to ‘Refresh Connection’.
- Replaced the word ‘Return” with a ‘current location’ symbol on the Find My Earphones page.
- Multi-language support added.
v1.0.0 (105) (22/12/2020)
- Melomania initial release.